Filter
Top Products
The Integrated Answering Device
23
outgoing message automatically switches to
announce only message.
To scroll between the prerecorded message or your
own personal greeting, press
greeting when the
outgoing message is played. If you want to use your
own greeting, or want to change your greeting to
omit the prompt “to leave a message”, refer to
“Recording a personal outgoing message”
(Greeting) on page 25.
Setting the Message Alert tone
Message Alert feature lets you know you have new
messages by sounding a short beeping tone. If you
set the Message Alert to On and when a new
message is received, the alert tone will sound every
15 seconds.
1. Press
clock/menu five times in standby mode.
You hear “Message alert” and the current
setting ([ ] Off or [ ] On), and it is displayed
on the base. Then you hear the guidance for
setting the message alert.
2. Press
SELECT/VOLUME/ or SELECT/VOLUME/
to select [ ] or [ ].
3. Press
set to select the new setting. You hear a
confirmation tone, then the announcement
“Message Alert” and the current setting you
have selected is announced. After a few
seconds, the system announces “To set
language, press menu again”. When the first
new message is received, the beeping tone will
begin to sound.
Turning the Message Alert tone Off by pressing any
key.
1. To quickly turn Message Alert tone off, press
any key on the base unit and the tone will
43-3823.FM Page 23 Thursday, March 27, 2003 10:22 AM