Filter
Top Products
Operation
14
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset
too far from your base unit, your call will terminate
within 1 minutes.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your
phone, you can manually change the phone’s
channel for clear operation. This function works
only when the phone is in use.
Press
CHANNEL. The TALK/BATT LOW LED flashes,
indicating the phone is changing to another
channel.
PAGE
To locate the handset (while it’s off the base), press
find hs on the base. The handset beeps for 60
seconds.Ô
Paging is canceled when pressing any handset key,
find hs on the base or the handset is returned to the
base.
FLASH AND CALL WAITING
If you have “Call Waiting” service and a call waiting
tone sounds while you are on a call, press
FLASH to
accept the waiting call. There is a short pause, then
you will hear the new caller. To return to the original
caller, press
FLASH again.Ô
Ô NOTE Ô
Page
Paging is also canceled
when the phone receives
an incoming call.
Flash and Call Waiting
You must subscribe
through your local
telephone company to
receive Call Waiting
Service.
43-3823.FM Page 14 Thursday, March 27, 2003 10:22 AM