Filter
Top Products
Operation
16
Temporarily Mute Ringer
If the handset is off the cradle, simply press
END to temporarily mute the incoming ring.
The ringer will sound with the next incoming
call.
REDIAL
PAUSE/RDL redials the last number dialed.
The redialed number can be up to 32 digits
long.
TONE DIALING SWITCH-OVER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing).
If you need to enter tone dialing digits, you
can switch-over to tone dialing during the
call. For example, entering your bank
account number after you have called your
bank. Ô
Initially make your call with the pulse dialing
mode. Once your call connects, press
//
TONE. Enter the desired number. These
digits will be sent as tone dialing. Once the
call ends, the tone mode is canceled and
pulse dialing mode resumes.
TRAVELING OUT OF RANGE
During a call, as you begin to move your
handset too far from your base unit, noise
increases. If you pass the range limits of the
base unit, your call will terminate within one
minute.
SELECTING A DIFFERENT
CHANNEL
If you encounter interference while using
your phone, you can manually change the
Ô NOTES Ô
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing (See
“Chain Dialing” on
page 24.)
43-3595.book Page 16 Monday, June 7, 2004 2:27 PM