Filter
Top Products
Installation
12
2. After fully charging both batteries,
remove the handset in the extra
charging cradle and place it on the
main base cradle. The LED light on the
main base will begin to flash, indicating
that the registration is taking place
between the extra handset and the
main base.
3. Wait for at least five seconds before
removing the handset from the main
base.
Congratulations, the registration has been
completed and your dual handset cordless
phone is ready for use!
WHEN TO RE-REGISTER
HANDSETS
1. You’ll need to re-register the extra
handset (follow steps “Before Using,
Register Extra Handset to the Main
Base Unit” on page 11) each time the
digital security code is changed. Refer
to “Changing the Digital Security Code”
on page 32 for details regarding the
Digital Security Code. Ô
2. When there is a power failure for more
than one hour, (e.g. due to electrical
storm or if the unit is unplugged during
a move), both handsets will need to be
re-registered. To re-register, follow the
registration process on “Before Using,
Register Extra Handset to the Main
Base Unit” on page 11.
Ô NOTES Ô
• If the extra handset’s
battery becomes very
low, the handset must be
recharged for 15-20
hours and re-registered
to the main base unit.
• Make sure to return the
handsets to the cradles
after each phone call.
43-3595.book Page 12 Monday, June 7, 2004 2:27 PM