Radio Shack 43-3557 Cordless Telephone User Manual


 
Memory Dialing
25
6. Press
MEM or SELECT. The cursor
flashes indicating that the display is
ready for the number to be edited.
7. Use the number key,
/TONE/<, #/>,
PAUSE/REDIAL or CH/DELETE to edit
the phone number. The phone number
cannot exceed 20 digits.
If you don’t want to change the phone
number, skip this step.
8. Press
MEM or SELECT. If you changed
either name or phone number, a
confirmation display shows up. If it is
correct, press
VOL key to select
Yes” and press SELECT. You hear a
confirmation tone. The memory storage
is complete.
For example, if you store a name and
number into memory location number
01, the display shows ¨Memory01
Stored
¨. After about two seconds,
Select Memory screen is displayed.
9. Press
END to return to the standby
mode.
ERASING A STORED NAME
AND PHONE NUMBER
1. Press MEM, ¨Select Memory¨ is
displayed.
2. Press
VOL or VOL keys, or enter a
number (
0 - 9) to select the memory
location you would like to erase.
3. Press MEM or SELECT.
The screen appears with the memory
location number that you have selected
in the display.
43-3557.book 25 ページ 2003年12月17日 水曜日 午後4時54分