Filter
Top Products
Installation
10
2. Plug one end of the supplied modular
cord (short for a wall plate, long for
direct wall mounting) into the TEL LINE
jack on the base’s back.
3. Plug the supplied AC adapter's barrel
plug into the DC IN 9V jack.
4. Route the adapter
and modular cords
through the
bracket’s grooves.
5. For a wall plate,
align the bracket’s
keyhole slots with
the wall plate
studs and slide the base downward to
secure it.
For direct wall
mounting, align
the bracket’s
keyhole slots
with the
mounting
screws and slide
the base
downward to secure it.
6. Plug the adapter into a standard AC
outlet. And plug the modular cord’s
other end into a modular phone line
jack.
CONNECTING/CHARGING THE
BATTERY PACK
The phone comes with a rechargeable
nickel-cadmium battery pack in the handset,
but not connected. Before using your
phone, you must connect the battery pack.
Then charge it for about 15–20 hours.
!
!
IMPORTANT
!
The EPA
certified
RBRC
®
Battery
Recycling Seal
on the nickel-
cadmium (Ni-Cd) battery
indicates RadioShack is
voluntarily participating in
an industry program to
collect and recycle these
batteries at the end of their
useful life, when taken out
of service in the United
States or Canada. The
RBRC program provides a
convenient alternative to
placing used Ni-Cd
batteries into the trash or
the municipal waste
stream, which may be
illegal in your area. Please
call 1-800-THE-SHACK (1-
800-843-7422) for
information on Ni-Cd
battery recycling and
disposal bans/restrictions
in your area. RadioShack’s
involvement in this program
is part of the company’s
commitment to preserving
our
environment and
conserving our natural
resources.
43-3557.book 10 ページ ２００３年１２月１７日 水曜日 午後４時５４分