Filter
Top Products
Memory Dialing
20
3. Press
MEM or SELECT.
4. Press
MEM or SELECT. A cursor flashes
indicating that the display is ready for
the name to be entered.
If “
Edit Memory X X” appears, the
selected memory location is already
stored. Then you must either edit the
entry in this location, delete the entry in
this location, or select ¨
Go Back¨ to
choose another location.
5. To enter a name (up to 13 characters),
use the number keys.
• See “Steps for Entering Names and
Special Characters” on page 21.
• Use
#/> and /TONE/< keys to move
the cursor to the desired location.
• Use
CH/DELETE to delete characters
as needed.
• Press and hold
CH/DELETE to delete
all the characters.
• If a name is not required, go to step
6.
6. Press
MEM or SELECT. ¨Store
Number¨ is displayed.
The cursor flashes indicating that the
display is ready for the number to be
entered.
7. Use the number keys to enter the
phone number.
• The phone number cannot exceed
20 digits.
43-3557.book 20 ページ ２００３年１２月１７日 水曜日 午後４時５４分