Filter
Top Products
16
Telephone Operation
17
Telephone Operation
few seconds. MUTE appears at the bottom of the
screen until the mute function is turned off.
2. Press MUTE/REMOVE again to resume the
conversation. The handset screen temporarily
shows MICROPHONE ON.
Ringer Mute
When the telephone is ringing, press OFF/CLEAR
or MUTE/REMOVE to temporarily silence the ringer
without disconnecting the call. The next call rings
normally.
Call Waiting
If you subscribe to call waiting service from your telephone company, you
hear an alert tone if there is an incoming call while you are on another call.
Press /FLASH to answer the new incoming call. Press /FLASH again
to return to the original call.
Find Handset
Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base.
All idle handsets ring and the screens show
** PAGING **.
To end paging, press /FLASH, , any
dialing keys (0-9, #, *), or press
FIND HANDSET on the telephone base.
Chain Dialing
Use this feature while already dialing one phone number or while on a call
to initiate a dialing sequence from numbers stored in the directory, stored in
the call log, or from the most recent redial phone number. Chain dialing can
be useful when accessing numbers other than phone numbers (such as bank
account information or access codes).
To access a number in the directory while on a call:
1. Press MENU/SELECT twice to select >DIRECTORY.
2. Scroll to the desired entry by pressing or .
3. Press MENU/SELECT to dial the displayed number.
PHONE 0:00:00
MUTED
MUTE
PHONE 0:00:00
MUTED
MUTE
RINGER MUTERINGER MUTE
To access a number in the call log while on a call:
1. Press MENU/SELECT and then press or to highlight >CALL LOG.
2. Press MENU/SELECT to select.
3. Scroll to the desired entry by pressing or .
4. Press MENU/SELECT to dial the displayed number.
To access the last number on the redial list while on a call:
Press REDIAL/PAUSE to dial. Press REDIAL/PAUSE again within two
seconds to cancel the chain dialing.
Multiple Handset Use
You can use up to two system handsets at a time on an outside call. If
a handset is already on a call and you would like to join the call, press
/FLASH or on another handset to join the call.
To end the call, press OFF/CLEAR or place the handset in the telephone
base or charger. The call will not be terminated until all handsets hang up.
You can buy additional expansion handsets for this telephone base from
your local RadioShack store or at www.RadioShack.com. You can register up
to 12 handsets to the telephone base.
The first nine handsets that you register are named HANDSETS 1-9. Use
the handset number to intercom and transfer calls. Although the names
for handsets 10-12 appear in their displays as 10-12, when you intercom or
transfer to one of them, you must use *0 for HANDSET 10, *1 for HANDSET
11, and *2 for HANDSET 12.
Intercom
You can have a conversation between two system handsets, so you can call
someone in another room of your home.
1. Press INT on your handset when not in use.
• If you have a two-handset system, your handset
screen shows CALLING OTHER HANDSET.
• If you have more than two handsets, your screen
shows INTERCOM TO:. Use the dialing keys to
select the other handset. Your screen shows
CALLING HANDSET X.
The other handset rings and its screen shows either
OTHER HANDSET IS CALLING or HANDSET X IS
CALLING.
CALLING
OTHER HANDSET
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
OTHER HANDSET
IS CALLING