Filter
Top Products
18
Telephone Operation
19
Telephone Operation
2. To answer the intercom call, press /FLASH, , INT, or any
dialing keys (0-9, #, *) on the other handset. Both handsets now show
INTERCOM.
3. To end an intercom call, press INT, OFF/CLEAR, or place the handset
back in the telephone base or charger.
n Note: If the other handset does not answer the intercom call within 100
seconds, is in use, or is out of range, your originating handset screen shows
UNABLE TO CALL TRY AGAIN and returns to idle mode.
To answer an incoming call during an intercom call:
If you receive an incoming outside call during an intercom call, there is an
alert tone.
• To answer the call, press /FLASH. The intercom call ends
automatically.
• To end the intercom call without answering the incoming call, press
OFF/CLEAR.
Share an Outside Call
You can call another system handset to join an outside call. That call
continues even if you hang up.
1. During a call, press INT. The other handset rings.
The outside call is put on hold.
• If you have a two-handset system, your handset
screen shows CALLING OTHER HANDSET. The
other handset rings and its screen shows OTHER
HANDSET IS CALLING.
• If you have more than two handsets, your screen
shows TRANSFER TO:. Use the dialing keys to
select the other handset. Your screen then shows
CALLING HANDSET X. The other handset rings
and its screen shows HANDSET X IS CALLING.
2. To answer the call on the other handset, press
/FLASH, , INT, or any dialing keys (0-9, #, *).
The outside call is still on hold and both handsets
now show INTERCOM. You can now have a private
conversation between the system handsets.
TRANSFER TO:
TRANSFER TO:
CALLING
HANDSET X
CALLING
HANDSET X
HANDSET X
IS CALLING
HANDSET X
IS CALLING
INTERCOM
INTERCOM
n Notes:
• If you want to cancel an intercom call and reconnect to the outside call
before the other handset answers, press /FLASH, or INT on your
originating handset.
• If the other handset does not answer the intercom call within 100
seconds, is in use, or is out of range, your originating handset screen
shows UNABLE TO CALL TRY AGAIN and reconnects to the outside call
automatically.
3. From this intercom call, you have the following options:
• You can let the other handset join you on the outside call in a three-
way conversation. Press and hold INT on your originating handset.
• You can transfer the call. Press OFF/CLEAR, or place your handset
back in the telephone base or charger. Your screen shows CALL
TRANSFERED. The other handset is automatically connected to the
outside call.
• You can alternate between the outside call (OUTSIDE CALL appears
on the screen) and the intercom call (INTERCOM appears on the
screen). Press INT repeatedly on your originating handset.
• The other person can leave the intercom call by pressing OFF/
CLEAR, or placing the other handset back in the telephone base or
charger. The outside call continues with the original system handset.