Filter
Top Products
20
Directory
21
Directory
Directory
The directory can store up to 50 entries with up to 30
digits for each phone number and 15 characters for each
name.
• When there are no records in the directory, the
screen shows DIRECTORY EMPTY.
• When the directory is full and you try to save an entry,
the screen shows LIST FULL.
• If you try to save a number already stored in the
directory, the screen shows ALREADY SAVED.
• If the telephone number in the directory exceeds 15
digits, <* appears in front of the telephone number.
Press * to move towards the end of the telephone
number or press # to move towards the beginning of
the telephone number.
• Only one handset can review the directory at a time.
If a handset tries to enter the directory while another
handset is already in it, NOT AVAILABLE AT THIS TIME
appears.
n Note: Directory entries are shared by all system
handsets. Any additions, deletions, or edits made on
one handset affect the directory on all handsets.
Store a Directory Entry
Use the following steps to store an entry in the directory.
1. Press MENU/SELECT when the handset is not in use.
2. Press or to select >DIRECTORY and then press MENU/SELECT.
3. Press or to select >STORE, then press MENU/SELECT. The screen
shows ENTER NUMBER.
4. Use the dialing keys to enter the number.
• Press MUTE/REMOVE to backspace and erase a digit.
• Press and hold MUTE/REMOVE to erase the entire entry.
• Press to move the cursor to the left or to the right.
• Press and hold REDIAL/PAUSE to insert a dialing pause
(p appears).
- OR -
DIRECTORY EMPTY
LIST FULL
ALREADY SAVED
ELIZABETH JONES
<* 180012345678
ELIZABETH JONES
123456789012 #>
DIRECTORY EMPTY
LIST FULL
ALREADY SAVED
ELIZABETH JONES
<* 180012345678
ELIZABETH JONES
123456789012 #>
• Copy a number from the redial list by pressing REDIAL/PAUSE
and then , , or REDIAL/PAUSE to select a number. Press
MENU/SELECT to copy the number.
5. Press MENU/SELECT to move to the name. The screen shows
ENTER NAME.
6. Use the dialing keys (see “Character Chart” below) to enter the name
using the method explained in step 4 above. Press # to insert a space.
7. Press MENU/SELECT to confirm.
Character Chart
Use the dial pad and the chart below to enter a name (up to 15 characters).
Each press of a particular key causes the characters to be displayed in the
following order:
Number
key
Characters by number of key presses
1 2 3 4 5 6 7 8 9
1 1 # ‘ , - . &
2 A B C 2 a b c
3 D E F 3 d e f
4 G H I 4 g h i
5 J K L 5 j k l
6 M N O 6 m n o
7 P Q R S 7 p q r s
8 T U V 8 t u v
9 W X Y Z 9 w x y z
0 0
* * ? ! / ( ) @
# space
n Note: When entering a name in the directory, the first letter of each
word is automatically capitalized.