Filter
Top Products
Operation
18
AREA CODE
If you enter a 3-digit area code number in
the Area Code option, your local area code
does not appear in Caller ID messages. Do
not program this option, if your calling area
requires 10-digit dialing. When reviewing
Caller ID messages, you will see only the
local seven digit number. For calls received
from outside your local area code, you will
see a full 10-digit number.
1. When the phone is in the standby
mode, press and hold
CID/MENU. The
Caller ID setting screen appears.
2. Press
VOL d key twice to select ¨AA
AA
rr
rr
ee
ee
aa
aa
CC
CC
oo
oo
dd
dd
ee
ee
¨.
3. Press
SELECT.
4. Use the number keys (
0 - 9), or
DELETE/CHANNEL to enter the 3-digit
area code.
5. Press
SELECT. A confirmation tone
sounds and the displayed area code is
entered.
6. Press
end or return the handset to the
base unit to complete the setting. The
handset returns to the standby mode.Ô
Choosing the dialing mode
Most phone systems use tone dialing which
sends DTMF tones through the phone lines.
However some phone systems still use
pulse dialing such as in rural areas. Ô
The default setting is tone dialing.
Depending on your dialing system, set the
mode as follows:
Ô NOTE Ô
Area Code
• If your calling area
requires 10-digit dialing,
do not program this
option.
• When the area code
has already been stored
in memory, the stored
area code will be
displayed. To change it,
use the DELETE/
CHANNEL and number
keys to enter the new
area code.
• Then press SELECT. A
confirmation tone
sounds. To complete
the setting, press end
or return the handset to
the base unit.
Choosing the dialing
mode
Make sure your battery
pack is fully charged
before choosing the dialing
mode.
43-3548.fm Page 18 Tuesday, February 25, 2003 1:06 PM