Filter
Top Products
Operation
15
Temporarily Mute Ringer
If the handset is off the base, simply press
the
end key to temporarily mute the
incoming ring. The ringer will sound with the
next incoming call.
REDIAL
The REDIAL/PAUSE key redials the last
number dialed. The redialed number can be
up to 32 digits long.
TONE DIALING SWITCH-OVER
Some telephone companies use equipment
that requires pulse dialing (sometimes
referred to as rotary dialing).
If you need to enter tone dialing digits, you
can switch-over to tone dialing during the
call. For example, entering your bank
account number after you have called your
bank. Ô
Initially make your call with the pulse dialing
mode. Once your call connects, press the
/tone/ff
ff
key. Enter the desired number.
These digits will be sent as tone dialing.
Once the call ends, the tone mode is
canceled and pulse dialing mode resumes.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your
handset too far from your base unit, noise
increases. If you pass the range limits of the
base unit, your call will terminate within 1
minute.
Ô NOTE Ô
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing (See
page 24.)
43-3548.fm Page 15 Tuesday, February 25, 2003 1:06 PM