Filter
Top Products
7
MOUNTING THE PHONE
You can place the phone on a desk or
table, mount it on a standard wall plate,
or mount it directly on a wall.
Select a location that is:
• Near an AC outlet
• Near a modular phone line jack
• Out of the way of normal activities
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available from your local Ra-
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
Caution:
The supplied AC adapter was
designed specifically for your System
1250. Use only the supplied adapter.
On a Desk
1. Remove the mounting bracket by
holding in the tab on the right side of
the bracket and gently pulling out
the bracket.
2. Plug one end of the supplied long
modular cord into the phone jack on
the back of the phone.
3. Insert the supplied AC adapter’s
barrel plug into the
DC 9V
jack on
the back of the phone.
Phone
Jack
DC 9V
Jack
43-986.fm Page 7 Monday, August 16, 1999 5:16 PM