Filter
Top Products
13
USING HOLD
To put a caller on hold, press
HOLD
. The
HOLD
indicator lights.
To resume the call, press
HOLD
again or
pick up an extension phone on the same
line.
Notes
:
• Caller ID information does not ap-
pear for an incoming call while a call
is on hold.
• We do not recommend keeping a
call on hold for very long if you sub-
scribe to Caller ID. The Caller ID
information sent by the phone com-
pany might disconnect the call on
hold if a new call comes in.
USING TONE SERVICES
ON A PULSE LINE
If you have pulse service, you can still
use special services that require tone
signals, such as bank-by-phone, by fol-
lowing these steps.
1. Be sure
T/P
is set to
P
.
2. Dial the service’s main number.
3. When the service answers, press .
appears. Any additional numbers
you dial are sent as tone signals.
After you complete the call and hang up,
the phone resets to pulse dialing.
HOLD
Indicator
43-986.fm Page 13 Monday, August 16, 1999 5:16 PM