Radio Shack 1250 Telephone User Manual


 
21
TROUBLESHOOTING
We do not expect you to have any problems with your telephone, but if you do, the
following suggestions might help.
If you still have problems, disconnect the phone. If other phones on the same line
work properly, the fault is in this phone or its installation. If you cannot find the prob-
lem, take your System 1250 to your local RadioShack store for assistance.
Problem Suggestion
No dial tone. Check that the phone line and handset cords
are securely connected.
Display is blank. Batteries are weak or not installed and AC
adapter is not connected.
appears. AC power is interrupted. Be sure AC adapter
is correctly and securely connected.
Volume drops or you hear
unusual sounds.
Someone has picked up another phone on
the same line. Hang up the other phone.
Call is noisy. Check that the phone line and handset cords
are securely connected.
Hang up and redial the number.
Phone dials 1+area code+num-
ber when dialing a local number
from a Caller ID record.
Store the local area code (see “Setting the
Area Codes” on Page 11).
Can receive calls, but cannot
make calls.
Set
T
/
P
correctly for the type of service you
have (see “Setting the Dialing Mode” on
Page 10).
43-986.fm Page 21 Monday, August 16, 1999 5:16 PM