Filter
Top Products
Ikôn Rugged PDA (Windows CE 5.0) User Manual 199
Chapter 5: Configuration
Imager
Code 39 Settings
5.14.4.3 Code 39 Settings
Enabled
Set this parameter to on to enable “Code 39”.
Field Size/Chars
Refer to “Field Size/Chars” on page 170 for details.
5.14.4.4 Code 128 Settings
Enabled
Set this parameter to on to enable “Code 128”.
Field Size/Chars
Refer to “Field Size/Chars” on page 170 for details.
5.14.4.5 EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides three options: Disabled, Optional and Required. Depending on the value chosen
for this parameter, an addendum is recognized or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this
parameter is set to Optional, the scanner searches for an addendum and if one exists,
appends it to the main bar code. When the parameter is set to Required, the scanner does not
accept the main bar code without an addendum.
Prefix/Suffix
Refer to “Prefix/Suffix” on page 171.
Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if
at least some of the bar codes being read have addendums.