Filter
Top Products
SoundStation VTX 1000 Operation Manual
6
SoundStation VTX 1000 Operation Manual
7
User’s Guide
2 Press the button or
the SEND soft key, and the
complete number will be dialed.
If you place a call to another
wideband-capable phone,
will appear
on your LCD, indicating that your call
is benefitting from the enhanced audio
quality of a wideband connection.
Note: The subwoofer (see “Using the
VTX Subwoofer,” pg. 22) allows
you to experience the full spectrum
of wideband sound.
A wideband connection takes
several seconds to establish.
Music will play while you wait.
Please refer to “Dial an Entry,”
in the Phone Book section, pg. 12,
for instructions on calling a number
in your Phone Book.
Redial a Call
To redial the last number dialed out
from the SoundStation VTX 1000,
press the REDIAL soft key.
The screen will display the phone
number of the party being dialed.
REDIAL
CHANGE REMOVE
John Johnson55
5555555
Company Name
DIALCHANGE REMOVE
Dial a Call Using the Phone Book
End a Call
To end a call, press the button.
If you initiate a multi-point call, all
calls will disconnect when you press
the
button.
The duration of your ended call
will be displayed for 6 seconds.
0:05:23
SP DIAL PH BOOK REDIAL
(555)555-1111call ended
Mute and Unmute a Call
When a call is muted, you can hear the
remote party, but they cannot hear you.
The three LEDs are red when a call is muted,
and green when it is not.
Mute
To mute a call, press the
(Mute) button.
ADD CALL HOLD
MUTE
(555)555-1111
AMDD CALL
0:01:15
HOLD
(555)555-1111
MODE
MODE
A Muted Call
Unmute
Press the
button again
to unmute a call.
Hold
To hold a call, press the HOLD soft key.
MADD CALL RESUME
HOLD
(555)555-1111
MO
0:01:15
HOLD
(555)555-1111
MODE
MODE
MADD CALL RESUME
HOLD
(555)555-1111
MO
0:01:15
HOLD
(555)555-1111
MODE
MODE
The three LEDs blink red when a call is on hold
and are green when it is resumed.
Hold and Resume a Call
When a call is on hold,
you cannot hear your remote party,
and they cannot hear you.
Hold Soft Key During an Active Call
Resume Soft Key During a Held Call
Resume
Press the RESUME soft key to
resume the conversation.
OR
SEND