Polycom 5020 Telephone User Manual


 
Polycom Kirk 5020-5040 User Guide Information
76 Polycom, Inc.
6 The product should be operated only from the type of power source
indicated on the instructions. If you are not sure of the type of power
supply, consult your dealer or local power company.
7 Do not overload wall outlets and extension cords as this can result in fire
or electrical shock.
8 Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in fire, electrical shock, or injury. Never spill liquid of any kind into
this product.
9 To reduce the risk of electrical shock or burns, do not disassemble this
product. Opening or removing covers may expose you to dangerous
voltages, dangerous electrical current, or other risks. Incorrect reassemble
can cause electrical shock when the appliance is subsequently used. If the
product need repair, consult your dealer.
10 Refer servicing to qualified service personnel.
11 Avoid using telephone during an electrical storm. There may be a risk of
electrical shock from lightning.
12 Do not use the telephone to report a gas leak in the vicinity of the leak.
13 Do not place the base or charger near microwave ovens, radio equipment,
or non-ground connected televisions. These appliances may cause
electrical interference to the base or handset
14 The charger must be placed on a hard, flat surface and connected to a
functional 120 volt AC power source depending on the country of use.
15 This telephone will not operate in the event of a blackout. Please keep a
backup phone for emergencies.
16 Installation must be performed in accordance with all relevant national
wiring rules.
17 Plug acts as Disconnect Device - The socket outlet to which this apparatus
is connected must be installed near the equipment and must always be
readily accessible.
18 This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
Intrinsic safety
Do not use the handset in conditions where there is a danger of electrically
ignited explosions.
Exposure to sunlight, heat and moisture
Do not expose the cordless phone to direct sunlight for long periods. Keep the
cordless phone away from excessive heat and moisture.