Polycom 5020 Telephone User Manual


 
Polycom, Inc. 59
Polycom Kirk 5020-5040 User Guide Settings
3 Scroll to Auto answer and press Select.
4 Scroll to Settings and press Change.
5 Scroll to the desired setting and press Select.
Out of Range
The out of range indicator appears when handset is moving out of or already is
out of range of base station.
Note: When the handset has been outside the coverage area, it can take up
to 30 seconds before the handset is back on the system after re-entering
coverage area.
To turn out of range on/off:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Out of range and press Select.
4 Scroll to On or Off and press Change.
Changing Settings of Out of Range
The handset offers two types of out of range alerts:
Icon only
Tone (beep) + icon
With the out of range indicator turned on:
If handset is moving out of range, the low signal icon will appear in
display.
If the handset gets out of range, the no signal icon will appear in display.
If tone + icon is selected, beeps will appear with short intervals as long as
the handset is out of range.
To change the settings:
1 Press Menu to enter main menu.
2 Scroll to Settings and press Select.
3 Scroll to Out of range and press Select.
4 Scroll to Settings and press Change.
5 Scroll to the desired alert and press Select.