Filter
Top Products
46 EN
17 Frequently
asked
questions
No signal bar is displayed on the
screen.
• The handset is out of range. Move
it closer to the base station.
• If the handset displays
[Unregister], register your handset.
Tip
• For further information, see chapter
‘Service’, section ‘Register the handsets’.
I have chosen a wrong language
which I cannot read, what do I do?
1
Press to go back to the standby
screen.
2
Press to access the main menu
screen.
3
One of the following options will
appear on the screen:
[Phone setup] > [Language]
[Réglages] > [Langue]
[Telefon-Setup] > [Sprache]
[Cong. telef.] > [Lingua]
4
Select it to access the language
options.
5
Select your own language.
If I fail to register the additional
handsets to the base station, what
do I do?
Your base memory is full. Unregister
the unused handsets and try again.
No dialing tone
• Check your phone connections.
• The handset is out of range. Move
it closer to the base station.
No docking tone
• The handset is not placed properly
on the base station/charger.
• The charging contacts are dirty.
Disconnect the power supply
rst and clean the contacts with a
damp cloth.
I cannot change the settings of my
voice mail, what do I do?
The voice mail service is managed
by your service provider but not the
phone itself. Contact your service
provider to change the settings.
The handset on the charger does not
charge.
• Make sure the batteries are
inserted correctly.
• Make sure the handset is placed
properly on the charger. The
battery icon animates when
charging.
• Make sure the docking tone setting
is turned on. When the handset
is placed correctly on the charger,
you can hear a docking tone.
• The charging contacts are dirty.
Disconnect the power supply
rst and clean the contacts with a
damp cloth.
• Batteries are defective. Purchase
new ones from your dealer.