32 EN
Set the dial mode
1
Select [Menu] > [Services] >
[Dial mode], then press [OK] to
conrm.
2
Select a dial mode, then press
[OK] to conrm.
» The setting is saved.
Note
• If your phone is in pulse dial mode,
press
during a call for temporary
tone mode. Digits entered for this call
are then sent out as tone signals.
Register the handsets
You can register additional handsets to
the base station. The base station can
register up to 4 handsets.
1
Select [Menu] > [Services] >
[Register], then press [OK] to
conrm.
2
Press and hold on the base
station for 5 seconds.
Note
• For models with an answering machine,
you hear a conrmation beep.
3
Press [OK] to conrm.
4
Enter the system PIN. Press
[Clear] to make corrections.
5
Press [OK] to conrm the PIN.
» Registration is completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
Note
• If the PIN is incorrect or no base
is found within a certain period,
your handset displays a notication
message. Repeat the above procedure
if registration fails.
Note
• The preset PIN is 0000. No change
can be made on it.