Filter
Top Products
9EN
3 Get started
Caution
• Make sure that you have read the
safety instructions in the ‘Important
safety instruction’ section before you
connect and install your handset.
Connect the base
station and charger
Warning
• Risk of product damage! Make
sure that the power supply voltage
corresponds to the voltage printed on
the back or underside of the phone.
• Use only the supplied power adapter
to charge the batteries.
Note
• If you subscribe to the digital
subscriber line (DSL) high speed
internet service through your
telephone line, make sure you install
a DSL lter between the telephone
line cord and the power socket.. The
lter prevents noise and caller ID
problems caused by DSL interference.
For further information on DSL lters,
contact your DSL service provider.
• The type plate is located on the
bottom of the base station.
1
Connect each end of the power
adapter to:
• the DC input jack at the back
of the base station;
• the power socket on the wall.
2
Connect each end of the line
cord to:
• the telephone socket at the
back of the base station;
• the telephone socket on the
wall.
English