Filter
Top Products
40 EN
Delete an incoming message
From the base
Press when you listen to the
message.
» The current message is deleted.
From the handset
1
When you listen to the message,
press [Option] to enter the
options menu.
2
Select [Delete], then press [OK]
to conrm.
» The current message is
deleted.
Delete all old incoming messages
From the base
Press and hold in standby mode.
» All old messages are
permanently deleted.
From the handset
1
Select [Menu] > [Answ. Machine]
> [Delete all], then press [OK] to
conrm.
» The handset displays a
conrmation request.
2
Press [OK] to conrm.
» All old messages are
permanently deleted.
Note
• You can only delete the read
messages. No deleted messages can
be recovered.
Set the ring delay
You can set the number of times the
phone rings before the call goes to
the answering machine.
1
Select [Menu] > [Answ. Machine]
> [Ring delay], then press [OK]
to conrm.
2
Select a new setting, then press
[OK] to conrm.
» The setting is saved.
Note
• Make sure that the answering machine
is switched on before this feature can
be applied.
Tip
• When you access the answering
machine remotely, you are
recommended to set the ring
delay to[Toll saver] mode. This is a
cost effective way to manage your
messages. When there are new
messages, the answering machine
picks up the call after 3 rings; When
there is no messages, it picks up the
call after 5 rings.