Philips XL390 Cordless Telephone User Manual


  Open as PDF
of 54
 
28 EN
ECO mode
The ECO mode reduces the
transmission power of the handset
and base station when you are on a
call or when the phone is in standby
mode.
1
Select [Menu] > [Phone setup] >
[Eco mode], then press [OK] to
conrm.
2
Select [On]/[Off], and press [OK]
to conrm.
» The setting is saved.
»
is displayed in standby mode.
Note
• When the ECO mode is set to [On],
the connection range between the
handset and the base station can be
reduced.
Name the handset
The name of the handset can be up
to 14 characters. It is displayed on the
handset screen in standby mode.
1
Select [Menu] > [Phone setup] >
[Phone name], then press [OK]
to conrm.
2
Enter or edit the name. To erase a
character, select [Clear].
3
Press [OK] to conrm.
» The setting is saved.
Set the backlight of the
LCD screen
You can set the backlight of the LCD
screen and keypad ashing on or off
when the phone rings.
1
Select [Menu] > [Phone setup] >
[Visual alert], then press [OK] to
conrm.
2
Select [Flashing on]/[Flashing off],
then press [OK] to conrm.
» The setting is saved.
Set the date and time
For information, see 'Set the date and
time' in the Get started section.
Set the display language
Note
• This feature only applies to models
with multiple-language support.
• Languages available vary from country
to country.
1
Select [Menu] > [Phone setup]
> [Language], then press [OK] to
conrm.
2
Select a language, then press [OK]
to conrm.
» The setting is saved.
 previous next