Filter
Top Products
Set Time / Date
Allows you to set the clock (hour and minute) and date (month and
day).The clock will also be updated by incoming Caller ID,if you have
subscribed to Caller ID service.The clock is set at “12:00AM 01/01”
when ex-factory.
1. Press [DIAL] button when “SET TIME / DATE” appears on the LCD.
The hour digit will blink.
2. Press [REVIEW ] or [REVIEW ] button to scroll digits to set
the hour. After the hour is set,press [DIAL] button to move on to
set the minute.
3. Repeat step 2 until you have set the hour,minute,month and day.
4. Press [DIAL] button to save your setting and [REVIEW] button
to go to the next setting option
Set Contrast
Allows you to adjust the LCD display contrast at 8 different levels.It is
set at level 4 when ex-factory.
1. Press [DIAL] button when “SET CONTRAST” appears on the
LCD.
2. Press [REVIEW ] or [REVIEW ] button to decrease
or increase the LCD display contrast.
3. Press [DIAL] button to save your setting.
4. Press [REVIEW ] button to go to the next setting option
SET DIAL VM.
Set Dial VM
Allows you to set your own voice mail access number.
1. Press [DIAL] button when “SET DIAL VM” appears on the LCD.
The first digit of the voice mail access number will blink.
2. Press [REVIEW ] or [REVIEW ] button to scroll digits to
enter the first digit of the access number.
3. Press [DIAL] button to move on to the second digit.
4. Repeat steps (2) and (3) until you have entered your voice mail
access number.You are now ready to dial your voice mail access
number by pressing the [DIAL VM] button.
5. Press [DIAL] button to save your setting and [REVIEW ] button
to go to the next setting option EXIT and press [DIAL] button to
leave the setup menu.
Note : If you want to change your voice mail access number,repeat the
steps 1-4.
Operation
EN
8