Filter
Top Products
c) The New Call Light Indicator does not stop lighting up unless you
have reviewed ALL new incoming calls by pressing [REVIEW ]
or [REVIEW ] button.
VOICE MAIL
If you have subscribed to Voice Mail service from your local telephone
company, the Message Waiting Light Indicator lights up steadily when
you have voice mails in your mailbox,and the LCD icon ( ) appears
on the LCD display.After you have listened to your voice mails, the
Message Waiting Light Indicator and the LCD icon ( ) will turn off.
To listen to your voice mails,press [DIAL VM] button to dial your voice
mail access number.The LCD display shows "PICK UP HANDSET".
Then,lift the Handset to dial the access number.Refer to the "Set DIAL
VM" section on page 8 to set the voice mail access number.
IMPORTANT:
Operation
EN
10
a) If the AC adapter is not connected, the Message Waiting Light
Indicator will flash every 3 seconds when you have new voice
mail(s).
LONG DISTANCE CALL
If there is a long distance incoming call,"LONG DISTANCE" appears
alternatively with the caller's name.
DIALING FROM CALLER ID
1. When reviewing a Caller ID record,press [DIAL] button to dial the
number shown on the LCD display. If the number format of the
Caller ID is not adjustable, the LCD display shows “PICK UP
HANDSET”.Lift the Handset to dial the number.
2. If you have pre-stored an area code, the number format of the
Caller ID is adjustable (see the "Important" section on page 11).
b) If the Message Waiting Light Indicator keeps on lighting up and the
LCD icon ( ) still appears after you have listened to all your voice
mails,press [DELETE] button to turn off the light and the LCD icon.