Filter
Top Products
Operation
IDLE MODE
When your Caller ID unit is in idle mode,the calls status and clock are
shown on the LCD display :
SETUP MENU
There are five options in the setup menu.
Set Language
Allows you to select the LCD display prompts in English,Spanish or
French.It is set at English when ex-factory.
1. During idle mode, press and hold [DIAL] button for about 3 sec-
onds.The LCD display shows “SETUP MENU ”.
2. Press [REVIEW ] button until “SET LANGUAGE” appears.
3. Press [DIAL] button again.The LCD display shows “ENGLISH”.
4. Press [REVIEW ] or [REVIEW ] button to select English,
French or Spanish.
5. Press [DIAL] button to save your setting and [REVIEW ]button
to go to the next setting option SET AREA CODE.
Set Area Code
Area codes of all incoming calls will be compared with the area code
you entered to determine if it is a local call.
1. Press [DIAL] button when “SET AREA CODE” appears on the LCD.
The first digit of the 3- digit area code will blink.
2. Press [REVIEW ] or [REVIEW ] button to scroll digits to enter
the first digit of your area code.
3. Press [DIAL] button to move on to the second digit.
4. Repeat steps (2) and (3) until you have entered your local area code.
5. Press [DIAL] button to save your setting and [REVIEW ] button
to go to the next setting option SET TIME / DATE.
Note :If you want to change your area code,repeat the steps 1 - 4.
7
Operation
EN