Filter
Top Products
45EN
English
Note
When there is no message, the phone hangs •
up automatically if no key is pressed for 8
seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering
machine.
1 Press MENU.
2 Select [ANSWER MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [SELECT] to conrm.
3 Select the new setting, then press
[SELECT] to conrm.
The settng is saved. »
Behavior of the LED display
on the base station
The table below shows you the current status
with different LED display behavior on the base
station.
LED
display
Answering
machine
status
Message status
No
display
Off --
On No new message
On Steady on: 3 new
messages;
Flashing: message full
with 3 new messages
On Message full
On Remote access/listen
to messages from the
handset