Filter
Top Products
39EN
English
15 Advanced
settings
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
1 Place the unregistered handset on the
base station.
The handset detects the base station »
and start to register automatically.
Registration is completed in less than 2 »
minutes. The base station automatically
assigns a handset number to the
handset.
Manual registration
If auto registration fails, register your handset
manually to the base station.
1 Press MENU on the handset.
2 Select [ADVANC. SETTINGS] >
[REGISTER], then press [SELECT] to
conrm.
3 Press and hold on the base station for
5 seconds until you hear a conrmation
beep.
4 Enter the system PIN. Press [CLEAR] to
make corrections.
5 Press [OK] to conrm the PIN.
Registration is completed in less than 2 »
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found •
within a certain period, your handset displays
a notication message. Repeat the above
procedure if registration fails.
Note
The preset PIN is 0000. No change can be •
made on it.
Unregister the handsets
1 If two handsets share the same base
station, you can unregister a handset with
another handset.
2 Press MENU.
3 Select [ADVANC. SETTINGS] >
[UNREGISTER], then press [SELECT] to
conrm.
4 Enter the system PIN. (The preset PIN
is 0000). Press [CLEAR] to remove the
number.
5 Select the handset number to be
unregistered.
6 Press [SELECT] to conrm.
The handset is unregistered. »
Tip
The handset number displays beside the •
handset name in standby mode.