Philips SE6581B/17 Answering Machine User Manual


 
55
Advanced settings
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
If no detect string (blank) is entered, the
prefix number will be automatically
added to the predial number after t is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after t is pressed.
13.11 Change Flash time
Flash time is the time delay by which the
line will be disconnected after you press
the t key. It can be set to short or
long.
The default value is Long.
1 Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
2 Scroll n to Flash Time and press
o Select.
3 Scroll n to Short or Long and
press o Select to confirm.
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
The use of your SE658 cannot be
guaranteed on all PABX.
13.12 Change the Dial Mode
The default value for dial mode that is
preset in your handset should be the best
suited for your subscribed network and
therefore you should not need to change
it.
1 Press m in idle mode, scroll n to
Advanced Set, and press
o
Select
.
2 Scroll n to Dial Mode and press
o
Select
.
3 Scroll n to Tone or Pulse and
press
o
Select
to confirm.
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
13.13 Set First Ring Detection
First ring detection allows the phone to
ring upon reception of the first ring
signal. It is recommended that you set
first ring detection Off if you subscribe
to caller line identification service.
(When using personalized phonebook
melodies, this will prevent a normal ring
tone from sounding before a melody
starts playing.) If you do not subscribe to
caller line identification service, it is
recommended that you set first ring
detection On. (See Section 10.4.)
1 Press m in idle mode, scroll n to
Advanced Set, and press
o
Select
.
2 Scroll n to First Ring and press
o
Select
.
3 Scroll n to On or Off and press
o
Select
to confirm.
A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
Note