Filter
Top Products
8
Environment and safety
60950). Following a power cut, the call in
progress is lost.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. This precaution may
be particularly important in rural areas.
2.5 Environmental care
Please remember to observe the local
regulations regarding the disposal of your
packaging materials, exhausted batteries
and old phone and where possible
promote their recycling.
2.6 Precautions
• Do not allow the handset to come
into contact with liquids or moisture.
• Do not open the handset, base station
or charger. This could expose you to
high voltages.
• Do not allow the charging contacts of
the charger or the battery to come
into contact with extraneous
conductive materials.
• There is a slight chance that the
telephone could be damaged by an
electrical storm. It is recommended
that users unplug the phone from the
USB socket and the phone line from
the phone wall socket during a storm.
• Because the phone works by sending
radio signals between the base unit
and the handset, wearers of hearing
aids may experience interference in
the form of a humming noise.
• We advise that this phone should not
be used near intensive care medical
equipment, nor by persons with
pacemakers.
• Your phone can interfere with
electrical equipment such as
answering machines, TV and radio
sets, clock radios and computers if
placed too close. It is recommended
that you position the base unit at least
one meter from such appliances.
Use only the mains adapter supplied with
this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 500 mA
Charger adapter:
Input: 100 V - 240 VAC 50/60 Hz
Output: 6 VDC 210 mA
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE.
Never use non-rechargeable batteries;
use recommended type supplied with
this telephone. NiMH batteries must be
disposed of in accordance with the
applicable waste disposal regulations.
FCC CERTIFICATION NUMBER IS
LOCATED ON THE CABINET
BOTTOM
The term “IC:” before the certification
number signifies that Industry Canada
technical specifications were met.This
certification means that the equipment
Caution
Caution
Caution