Philips SE255 Answering Machine User Manual


 
4
Important
Power supply information for charger
(multihandset pack only)
Input: AC100-240V/0.3A, 50Hz/60Hz
Output: DC6V/0.21A
JOD-SWR-07343
JODEN
Risk of explosion if battery is replaced
by an incorrect type.
Dispose of used batteries according
to the instructions.
About operating and storage
temperatures:
Operate in a place where
temperature is always between 0 and
35ºC (32 to 95ºF).
Store in a place where temperature is
always between -20 and 70ºC (-4 to
158ºF).
Battery life may be shortened in low
temperature conditions.
1.2 Conformity
We, Philips, declare that the product is in
compliance with the essential
requirements and other relevant
provisions of Directive 1999/5/EC. This
product can only be connected to the
analogue telephone networks of the
countries mentioned on the packaging.
You can find the Declaration of
Conformity on www.p4c.philips.com.
1.3 Using GAP standard
compliance
The GAP standard guarantees that all
DECT™ GAP handsets and base stations
comply with a minimum operating
standard irrespective of their make. Your
handset and base station are GAP
compliant, which means the minimum
guaranteed functions are: register a
handset, take the line, receive a call and
dial. The advanced features may not be
available if you use a handset other than
the handset of one of the model
described in this manual with your base
station.
To register and use your phone’s handset
with a GAP standard base station of a
different make, first follow the procedure
described in the manufacturer’s
instructions, then follow the procedure
described on page 29. To register a
handset of another make to your phone’s
base station, place the base station into
registration mode (page 29), then follow
the procedure in the manufacturer’s
instructions.
1.4 Recycling & disposal
Disposal instructions for old products.
The WEEE directive (Waste Electrical
and Electronic Equipment; 2002/96/EC)
has been put in place to ensure that
products are recycled using best available
treatment, recovery and recycling
techniques to ensure human health and
high environmental protection.
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused.