Filter
Top Products
25
Use more of your phone
4 Press h on the first handset to
transfer the external call to the
called handset.
• The external call is transferred.
If there is no answer from the called
handset, press i to resume the
external call.
5.8.3 Answer an external call
during intercom
1 During intercom, a new call tone is
emitted when there is an incoming
external call.
2 Press t to answer the external
call and end the intercom.
• The call is established.
5.8.4 Switch between an internal
and external call
During the call, press i to switch
between an internal or external call.
5.8.5 Establish a three-party
conference call
The conference call feature allows one
external call to be shared with two
handsets (in intercom). The three parties
can share the conversation and no
network subscription is required.
1 During the call, press i to put
the external call on hold (the caller
can no longer hear you).
2 Enter the handset number (key 1
- 5) you wish to establish the
conference call with.
3 Press t on the called handset to
answer the internal call, where both
internal callers can talk.
• Intercom is established.
4 Press and hold i for 2 seconds
on the first handset to start the
three-party conference.
• CONFERENCE will be
displayed on the screen once the
conference call is established.
5.9 Paging
The paging feature enables you to locate
a missing handset if the handset is in
range and contains charged batteries.
1 Press a on the base station.
• All the registered handsets start
to ring.
2 Once retrieved, press any key on
the handset to end the paging.
If there are no key presses within 30
seconds, the handset and base station
will automatically return to idle mode.
Press a on the base station again to
stop paging.
5.10 Chain Dialing
This feature allows you to dial an
extension to a number already saved in
the phonebook during a call.
1 Press t to take the line and press
o to open phonebook list.
• The phonebook entries are listed
in alphabetical order.
Note
Note
Tip