Filter
Top Products
3.3 Installation of the PC Programming Software
108 Installation Manual
Installing the KX-TAW848 Maintenance Console
Notes
• Make sure to install and use the KX-TAW848 Maintenance Console for MPR version 2.0.
• To install or uninstall the software into Windows 2000 Professional or Windows XP Professional,
the user must be grouped either of "Administrators" or "Power Users".
• When the PBX is first connected to the PC via USB, a wizard should appear and ask you to select
the appropriate USB driver. Browse for and select the KX-TDA USB driver, which is copied to the
local drive during installation.
Starting the KX-TAW848 Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TAW848 Maintenance Console with the Installer Level Programmer Code and
connect to the PBX for the first time after initialization (with the factory default setting), Quick Setup will
launch automatically. During Quick Setup, you will setup the following basic items:
• Date and Time of the PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/break/night) can
be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with ) is selected, " " must prefix
all feature numbers (except access numbers) when an extension user wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for operator call
and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the PBX (including
the country code). When necessary, this number will be used to access the PBX from a remote
location for maintenance purposes.
1. Copy the KX-TAW848 Maintenance Console setup file
to a local drive on the PC. (Its icon is shown here, on
the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the
installation wizard.
1. Connect the PC to the PBX with a USB cable.
2. Start the "KX-TAW848 Maintenance Console" from the
Start menu.