Filter
Top Products
Philips 9750 - User Manual
25
While the device stops at a spoken instruction, the corresponding string is displayed on the device:
• In Playback mode, only the spoken instruction string is shown on the display when the playback cursor moves
over a spoken instruction. The device will not beep and playback will not be interrupted.
• You can insert up to 32 spoken instructions into one file.
• You cannot insert spoken instructions into dictations which have been finished with EOL.
• You cannot insert an index mark into a spoken instruction.
Deleting spoken instructions
Deleting a spoken instruction is similar to deleting a section from the sound file. Do the following:
1. Go to the beginning of the spoken instruction and press the DELETE button once.
2. Go to the end of the spoken instruction and press the DELETE button again.
3. Confirm the delete operation by pressing the DELETE button for at least two seconds.
Working with the Foot Control LFH 0210/90B
The Philips 9750 has been designed to work with a footpedal device for the control of playback functions.
Foot Control switches
The Foot Control has three switches: middle, left and right switch. Their functions are:
• When you press the middle pedal, Fast Forward is started; when you release it, Fast Forward is stopped.
• When you press the left pedal, Fast Rewind is started; when you release it, Fast Rewind is stopped.
• When you press the right pedal, Playback is started; when you release it, Playback is stopped.
There is a priority sequence among the three Foot Control pedals.
• The middle pedal has the highest priority. It stops actions started by the left or right pedal.
• The left pedal has the next highest priority. It stops actions started by the right pedal.
• The right pedal has the lowest priority.
Recording with the Foot Control LFH 210/90B
The Foot Control is mainly used for transcribing dictations. However, it can also be operated in a mode which
enables you to start and stop the recording functions. When you operate the Foot Control for recording, you can
either use it in combination the Philips microphones LFH 276/10 and LFH 278/10 or the Philips conference
microphone LFH 172.
Foot Control and the Philips microphones LFH 276/10 and LFH 278/10
To use the Foot Control in combination with the Philips microphone LFH 276/10 for recording, do the following:
1. Connect the Foot Control to the FOOTSW socket of the Philips 9750.
2. Set the switch on the underside of the Foot Control to the T position (press-and-release). This setting means
that playback is started when the Playback pedal is pressed once. To stop playback, you have to press the
pedal again.