Filter
Top Products
IPD4-A2-GZ40-00 February 2005 13
the A connectors provide the subcriber connections for ports 1-12 and the B
connectors provide the subscriber connections for ports 13-24.
2. Detach the hook-and-loop fastener Strap from the female RJ21 connector
port: lift the hook-and-loop fastener tab from the bottom and pull the strap
upward to open, leaving it looped under the right side of the connector frame.
3. Slide the male RJ21 connector of your interface cable underneath the
hook-and-loop fastener, from the left, and press it firmly into the female RJ21
connector port on the chassis.