Filter
Top Products
Before Requesting Help
88
Answering System
Problem
You cannot redial by
pressing (REDIAL/PAUSE) or
(REDIAL).
You cannot have a
conversation using the
headset.
Remedy
•If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.
•Access numbers entered after pressing
(TONE) will not be included when
redialing.
•The (REDIAL/PAUSE) button on the
handset has a double function as either
redial or pause. It will redial the last
number dialed if pressed at the outset of
a call (p. 29). If another number has
been dialed first, it will operate as a
pause button (p. 56).
•Make sure that the headset is connected
properly (p. 78, 79).
• may have been pressed. If the
button lights, press to continue the
conversation with the headset.
•If “EXIT=Headset” is displayed on the
base unit, press (EXIT) to switch from
the speakerphone to the headset.
Problem
The answering system is on,
but incoming messages are
not recorded.
You cannot listen to the
recorded messages.
“Message full” flashes
on the base unit display and
the ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
Remedy
•The recording time is set to “Greeting
only”. Select “1 minute” or “3 minutes”
(p. 23).
•Memory is full. Erase some, or all, of the
messages (p. 61).
•Make sure that the unit is in the standby
mode.
•Memory is full. Erase some, or all, of the
messages (p. 61).
Answering System