Filter
Top Products
Wall Mounting
Before Mounting on a Wall
To mount the unit, it is necessary to remove the stand. For details, see "Removing the Stand (Page 56)".
Mounting the Unit
WARNING
• Do not mount the unit in a manner other than that described in this section.
• Make sure that the wall that the unit will be attached to is strong enough to support the unit (approx.
1.09 kg [2.39 lb]).
If not, it is necessary for the wall to be reinforced.
• Only use the optional wall mount kit with the unit. The wall mount kit includes the necessary screws,
washers, and wall mounting adaptor.
• When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
• When this unit is no longer in use, make sure to detach it from the wall.
CAUTION
• Make sure the cables are securely fastened to the wall.
1. Insert the 5 tabs (for KX-UT133/KX-UT136) or 3 tabs (for KX-UT113/KX-UT123) of the wall mounting
adaptor into the designated openings in the base, and then slide the wall mounting adaptor in the direction
of the arrow until it clicks.
For KX-UT133/KX-UT136:
62 Operating Instructions Document Version 2011-06
Installation and Setup