Filter
Top Products
Getting Started
8
Document Version 2011-03
Handset status indicators
The handset status indicators on the base unit
show the status of each handset as follows:
Display
Handset display items
Display items
Main menu icons
The following icons are shown when you press
down on the center of the joystick in standby
mode.
Base unit display items
Display items
Status Meaning
Light off The handset is free.
Light on The handset is in use.
Flashing The handset is paging the base
unit or being paged by it.
Item Meaning
w Within range of the base unit
_ Out of range of the base unit
l The line is available.
C The line is in use.
L When flashing:
The call is put on hold.
L When flashing rapidly:
An incoming call is now being
received.
s Speaker is on. (page 11)
~ Ringer volume is off. (page 12)
y The line is set to allow other units
to join the call. (page 11, 12)
m Handset number
& Battery level
$ Blocked call (page 29)
n Block anonymous call (page 29)
o Call forward (page 28)
p Do not disturb (page 29)
q Anonymous calls (Block Caller ID)
(page 30)
6 The line has received new voice
mail messages. (page 43)
,! Handset 1 is in use.
“1”–“6”: Handset
“0”: Base unit
s The shared line is in use. (page
13)
t The line is now registering the
VoIP server.
Line number (8 max.)
L When receiving a call, the last 4
digits are displayed.
Icon Feature
m Line status
IP service
# New Voice Mail
x Intercom
" Initial settings
C Phonebook
Item Meaning
l The line is available.
C The line is in use.
L When flashing:
The call is put on hold.
L When flashing rapidly:
An incoming call is now being
received.
~ Ringer volume is off. (page 16)
y The line is set to allow other units
to join the call. (page 15, 16)
$ Blocked call (page 36)
n Block anonymous call (page 36)
o Call forward (page 35)
p Do not disturb (page 36)
q Anonymous calls (Block Caller ID)
(page 37)
6 The line has received new voice
mail messages. (page 43)
Item Meaning