Panasonic KX-TGE234 Cordless Telephone User Manual


 
n W
eekly:
MbN: Select the desired day of the week
and press MSELECTN. a MOKN
5 Set the desired time.
6 *: Select AM or PM. a MOKN
7 Enter a text memo (10 characters max.).
a MOKN
8 MbN: Select the desired alarm tone. a
MSELECTN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9 MbN: Select the desired snooze setting.
a MSAVEN
10 MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, M
N,
or MSNOOZEN to
stop the sound but keep the snooze
function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook’s group feature
(page 25), you can also select groups of
callers whose calls override silent mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 14).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 F
or handset setting: MMENUN#238
For base unit setting (using a
handset)
*1
: MMENUN#*238
2 MbN: Select the desired setting. a
MSAVEN
R If you select Off, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select AM or PM. a MOKN
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select AM or PM.
7 MSAVEN a MOFFN
*1 KX-TGE240 series: page 3
Changing the start and end time
1 F
or handset setting: MMENUN#237
For base unit setting (using a
handset)
*1
: MMENUN#*237
2 Continue from step 3, “Turning silent
mode on/off”, page 33.
*1 KX-TGE240 series: page 3
Selecting groups to bypass silent
m
ode
1 For handset setting: MMENUN#241
For base unit setting (using a
handset)
*1
: MMENUN#*241
2 Select your desired groups by pressing
1 to 9.
R
” is displayed next to the selected
g
roup numbers.
R To cancel a selected group, press the
same dial key again. “
” disappears.
3 MS
AVEN a MOFFN
*1 KX-TGE240 series: page 3
Call block
T
his feature rejects calls from unwanted
callers (Caller ID subscribers only). The
For assistance, please visit http://www.panasonic.com/help
33
Programming
TGE21x23x24x(en)_1122_ver031.pdf33 33 2013/11/22 14:22:28