Panasonic KX-TGE234 Cordless Telephone User Manual


 
Note:
R D
epending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Call share
Y
ou can join an existing outside call.
Handset
T
o join the conversation, press M
N
when
the other unit is on an outside call.
Base unit
*
1
*1 KX-TGE240 series: page 3
To join the conversation, press MZN when the
handset is on an outside call.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 31).
Transferring calls, conference
c
alls
Outside calls can be transferred or a
conference call with an outside party can be
made:
between 2 handsets
between a handset and the base unit
*1
*1 KX-TGE240 series: page 3
Handset
1 D
uring an outside call, press MMENUN.
2 MbN: Intercom a MSELECTN
3 MbN: Select the desired unit. a MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press M
N to return to the outside
call.
5 To complete the transfer:
Press MOFFN.
To establish a conference call:
MM
ENUN a MbN: Conference a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a MbN: Hold a
MSELECTN
To resume the conference: MMENUN
a MbN: Conference a MSELECTN
R To cancel the conference: MMENUN a
MbN: Stop conference a
MSELECTN
You can continue the conversation
with the outside caller.
Base unit
*
1
*1 KX-TGE240 series: page 3
1 During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
To page a specific handset, enter the
handset number.
To page all handsets, press 0 or wait
for a few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3 To complete the transfer:
Press MZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Handset locator
Y
ou can locate a misplaced handset by
paging it.
20
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
TGE21x23x24x(en)_1122_ver031.pdf20 20 2013/11/22 14:22:27