Important:
R We recommend storing 10 digits (including an
area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will be
blocked.
n From the caller list:
Handset
1 MCN CID
2 MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
“Edit” a MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the 10-digit format. And
then, press MSAVEN. Go to step 5.
3 MMENUN
4 MbN: “Save CID” a MSELECTN
5 MbN: “Call block” a MSELECTN
6 MbN: “Yes” a MSELECTN
7 Edit the phone number if necessary (24 digits
max.).
8 MSAVEN a MOFFN
Base unit
1 MCIDN
2 MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number is shown
in the 10-digit format.
3 MSAVEN
4 MbN: “Call block” a MSELECTN
5 MbN: “Yes” a MSELECTN
6 Edit the phone number if necessary (24 digits
max.).
7 MSAVEN a MEXITN
n By entering phone numbers:
Handset
1 MMENUN#217
2 MMENUN a MbN: “Add” a MSELECTN
3 Enter the phone number (24 digits max.).
4 MSAVEN a MOFFN
Base unit
1 MMENUN#217 a MADDN
2 Enter the phone number (24 digits max.).
3 MSAVEN a MEXITN
Blocking incoming calls without phone number
You can reject a call when no phone number is
provided, such as a call just showing “Out of
area”.
Handset / Base unit
1 MMENUN#240
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When the unit receives a cellular call without a
phone number, the call may not be rejected.
Setting the first ring for the call block list
Handset / Base unit
If you do not want the first ring from a number on
the call block list to sound, turn the first ring setting
to “Off”. The default setting is “On”.
1 MMENUN#173
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Viewing/editing/erasing call block numbers
Handset
1 MMENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN a
MOFFN
Base unit
1 MMENUN#217
2 MbN: Select the desired entry.
R To exit, press MEXITN.
3 To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MEXITN
To erase a number:
For assistance, please visit http://www.panasonic.com/help
45
Programming
TG954x(en)_0628_ver031.pdf 45 2013/06/28 12:35:32