Filter
Top Products
Useful Information
51
For assistance, please visit http://www.panasonic.com/help
5 Connect the telephone line cord. Mount the
unit by inserting the mounting pins into the
round openings on the adaptor (for pin 2, use
the round cut out at the bottom of the adaptor
if you are using the 4 inch phone plate), then
slide the unit down to secure it. Connect the
AC adaptor to power outlet (page 9).
L There are 2 common types of wall phone
plates. The distance between 1 and 2
may vary depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
Charger
1
Drive the screws (not supplied) into the wall.
2 Mount the charger (A), then slide it down (B)
and to the right (C) until it is secure.
Belt clip
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
(120 V AC,
60 Hz)
83 mm
(3
1
/4 inches)
102 mm
(4 inches)
AC adaptor cord
2
2
1
1
■ To attach ■ To remove
A
A
B
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG938x(e).book Page 51 Friday, July 3, 2009 10:10 AM