Filter
Top Products
Getting started
17
For assistance, please visit http://www.panasonic.com/help
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Line selection mode
The line selection mode determines which line is
selected when:
– you press {C}/{s} on the handset (when
making/answering calls).
– you press {SP-PHONE} on the base unit (when
making/answering calls).
The following settings are available:
– “Auto” (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller list
(page 34) or while listening to a message (page
38, 39), the indicated line is used. When
answering a call, the ringing line is selected.
– “Line1”: Line 1 is selected.
– “Line2”: Line 2 is selected.
1 {MENU} i {#}{2}{5}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE}
4 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {■} (EXIT)
Note:
L You can select a line manually regardless of the
line selection mode by pressing {LINE 1} or
{LINE 2}.
Y Handset / [ Base unit
TG938x(e).book Page 17 Friday, July 3, 2009 10:10 AM