Filter
Top Products
Using Bluetooth devices
47
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth devices
The base unit is Bluetooth wireless technology
compatible.
By using with other Bluetooth devices such as a
cellular phone and headset, the following features
are available:
– Copying phonebook entries from your cellular
phone to the base unit (page 47)
– Having a hands-free conversation by registering
a Bluetooth headset to the base unit (page 48)
Important:
L Your cellular phone and headset must be
Bluetooth wireless technology compatible.
Copying phonebook entries
from a Bluetooth cellular
phone to the base unit
(phonebook transfer)
You can copy phonebook entries from your cellular
phone to the base unit.
Once you have copied phonebook entries to the
base unit, you can copy those entries to the
handset (page 24).
Important:
L If a copied entry has 2 or more phone numbers,
each phone number (6 max.) is stored as a
separate entry but with the same name in the
phonebook.
L If a phonebook entry in your cellular phone
includes additional data such as a picture, that
entry may fail to copy to the base unit.
1 Base unit:
{MENU} i {#}{6}{1}{8}
L “Please transfer phonebook data
from cell phone.” is displayed.
2 Your cellular phone:
Follow the instructions of your cellular phone
to copy phonebook entries. (You need to
search for and select the base unit on your
cellular phone.)
L The base unit’s PIN may be required
(default: “0000”).
L The entries being copied are displayed on
the base unit.
L When entries have been copied,
“Completed” is displayed on the base unit.
L You can continue copying other entries if
necessary. (depending on your cellular
phone)
3 Base unit:
{■} (EXIT)
Note:
L Some copied entries may have characters
which do not exist in the character table (page
22). These characters can be displayed but
cannot be entered when editing an entry.
L The unit does not support some characters. If a
copied entry includes those characters, they are
replaced with “; ”.
Changing the base unit’s PIN (Personal
Identification Number)
For security, the base unit’s PIN must be entered
when copying phonebook entries from a cellular
phone to the base unit. The default setting is
“0000”.
Important:
L If you change the PIN, please make a note of the
new PIN. The unit does not reveal the PIN to
you. If you forget the PIN, see page 57.
1 {MENU} i {#}{6}{1}{9}
L If you set the PIN for the first time, go to step
3.
2 Enter the current 4-digit PIN.
3 Enter the new 4-digit PIN. i {OK}
4 Enter the new 4-digit PIN again. i {OK}
5 {■} (EXIT)
[ Base unit
TG938x(e).book Page 47 Friday, July 3, 2009 10:10 AM