Panasonic KXTG9382T Telephone User Manual


 
Programming
32
For assistance, please visit http://www.panasonic.com/help
Special programming
Night mode
Night mode allows you to select a period of time
during which the handset and/or base unit will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Night mode can be set
independently for each handset and base unit.
Important:
L Set the date and time beforehand (page 16).
L Handset only: If you have set the alarm, the
alarm sounds even if the night mode is turned
on.
Setting the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Enter the desired hour and minute you wish to
start this feature.
3 Press {* } to select AM or PM. i {OK}
4 Enter the desired hour and minute you wish to
end this feature.
5 Press {* } to select AM or PM. i {OK}
6 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {} (EXIT)
Note:
L To correct a digit:
Handset: Press {<} or {>} to move the cursor
to the digit, then make the correction.
Base unit: Press {7} or {8} to move the
cursor to the digit, then make the correction.
Turning night mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: On or Off i {SAVE}
3 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {} (EXIT)
Note:
L When the night mode is turned on, 3 is
displayed.
Alarm
An alarm sounds at the set time for 3 minutes once
or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 16).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm option. i
{SELECT}
3 Enter the desired month and date.
4 Set the desired time. i {OK}
5 {V}/{^}: Select the desired ringer tone. i
{SELECT}
L We recommend selecting a ringer tone
different from the ringer tone set for outside
calls.
6 {SELECT} i {OFF}
L When the alarm is set, E is displayed.
Note:
L To stop the alarm, press any dial key or place
the handset on the base unit or charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L If you select Once, the setting changes to
Off after the alarm sounds.
L The ringer volume for alarm follows the higher
volume level of the 2 lines (page 30).
L When the ringer volume for outside calls of the 2
lines is set to off (page 30), the alarm sound is
heard at the low level.
Y Handset / [ Base unit
Y Handset / [ Base unit
Y Handset
Off Turns alarm off. Go to step 6.
Once An alarm sounds once at the set
time.
Daily An alarm sounds daily at the set
time. Go to step 4.
TG938x(e).book Page 32 Friday, July 3, 2009 10:10 AM