Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/help 45
Caller ID
I cannot page the handset. LThe called handset is too far from the base unit.
LThe called handset is in use. Try again later.
Problem Cause/solution
The handset does not
display the caller’s name
and/or phone number.
LYou have not subscribed to Caller ID service.
Contact your service provider/telephone
company to subscribe.
LIf your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, disconnect the unit
from the equipment and plug the unit directly
into the wall jack.
LIf your unit is connected to a telephone line with
DSL service, we recommend connecting a noise
filter between the base unit and the telephone
line jack. Contact your DSL provider for details.
LThe name display service may not be available
in some areas. Contact your service provider/
telephone company for details.
LOther telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
LThe caller requested not to send caller
information (page 23).
LIf a call is being transferred to you, the caller
information is not displayed.
LGenerally, caller information is displayed from
the 2nd ring.
The caller list/incoming
phone numbers are not
edited automatically.
LThe Caller ID number auto edit feature is turned
off. Turn it on and try again (page 28).
LYou need to call back the edited number to
activate Caller ID number auto edit.
I cannot dial the phone
number edited in the caller
list.
LThe phone number you dialed might have been
edited incorrectly (for example, the long
distance “1” or the area code is missing). Edit
the phone number with another pattern (page
24).
Time on the unit is shifted. LIncorrect time information from incoming Caller
ID changes the time. Set “Time adjustment”
off.
Problem Cause/solution
TG8231_8232.book Page 45 Thursday, July 19, 2007 3:22 PM