Panasonic KX-TG8231 Answering Machine User Manual


 
Useful Information
42 For assistance, please visit http://www.panasonic.com/help
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect
the base unit AC adaptor, then reconnect the base unit AC adaptor.
General use
Programmable settings
Problem Cause/solution
The unit does not work. LMake sure the batteries are installed correctly
and fully charged (page 12).
LCheck the connections (page 11).
LUnplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
LThe handset has not been registered to the
base unit. Register the handset (page 38).
I cannot hear a dial tone. LThe base unit AC adaptor or telephone line cord
is not connected. Check the connections.
LIf you are using a splitter to connect the unit,
remove the splitter and connect the unit to the
wall socket directly. If the unit operates properly,
check the splitter.
LDisconnect the unit from the telephone line and
connect a known working telephone. If the
working telephone operates properly, contact
our service personnel to have the unit repaired.
If the working telephone does not operate
properly, contact your service provider/
telephone company.
I do not know how to erase
missed call” from the
display.
LThere are unviewed missed calls remaining.
View them using the following method.
1 {MENU} (center of joystick) i x i
{SELECT}
2 Push the joystick down to search from the most
recent call, or push the joystick up to search
from the oldest call.
Problem Cause/solution
I have changed the display
language to a language I
cannot read.
LChange the display language (page 14).
TG8231_8232.book Page 42 Thursday, July 19, 2007 3:22 PM