Panasonic KX-TG8231 Answering Machine User Manual


 
Preparation
For assistance, please visit http://www.panasonic.com/help 15
Voice guidance language
You can select either “English” or
Español” as the voice guidance
language of the answering system
(page 30). The default setting is
English”.
1 {MENU} (center of joystick)
2 Select I by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “Settings”. i {SELECT}
4 Push the joystick up or down to
select “Voice prompt”. i
{SELECT}
5 Push the joystick up or down to
select the desired language. i
{SAVE} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
Tone”: For tone dial service.
Pulse”: For rotary/pulse dial service.
1 {MENU} (center of joystick)
2 Select * by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “Set tel line”. i
{SELECT}
4 Push the joystick up or down to
select “Set dial mode”. i
{SELECT}
5 Push the joystick up or down to
select the desired setting. i
{SAVE} i {OFF}
Date and time
Set the correct date and time so that:
You can use the alarm function (page
28).
The unit will announce the day and
time a message was recorded when
you play back on the answering
system (page 31).
1 {MENU} (center of joystick)
2 Select K by pushing the joystick in
any direction. i {SELECT}
3 Push the joystick up or down to
select “Date and time”. i
{SELECT}
4 Enter the current month, date, and
year.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
5 Enter the current hour and minute
(12-hour clock format).
Example: 9:30
{0}{9} {3}{0}
6 Press {*} to select “AM” or “PM”.
7 {SAVE} i {OFF}
Note:
LWhen English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
LIf you make a mistake when entering
the date and time, push the joystick
right, left, up, or down to move the
cursor, then make the correction.
LThe date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG8231_8232.book Page 15 Thursday, July 19, 2007 3:22 PM