Filter
Top Products
Useful Information
47
Liquid damage
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
My own greeting message
cannot be properly heard.
L Record your own greeting message again
(page 31).
I cannot operate the answering
system.
L Someone is using the unit. Wait for the other
user to finish.
L A caller is leaving a message. Wait for the
caller to finish.
L The handset is too far from the base unit.
Move closer.
I cannot operate the answering
system remotely.
L You are entering the wrong remote access
code. If you have forgotten your remote
access code, enter the remote access code
setting to check your current code (page 33).
L Press each key firmly.
L The answering system is turned off. Turn it on
(page 34).
L You are using a rotary/pulse telephone. Try
again using a touch-tone phone.
While recording a greeting
message or listening to
messages, the unit rings and
recording stops.
L A call is being received. Answer the call and
try again later.
Problem Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use. If the unit does not
work properly, contact your nearest
Panasonic service centre.
Problem Cause/solution